› Behavior of spring supported thrust bearings: a CFD and experimental investigation - Samuel Cupillard, Hydro-Québec Research Institute
09:30-10:30 (1h)
› Design of Controllable Lubrication Considering Coupled Rotor-Bearing-Foundation Dynamics - Kenneth Jensen, Technical University of Denmark
09:30-10:30 (1h)
› Effect of partial wall slip on the THD behaviour of high-loaded plain journal bearings - Shuhui CUI, Harbin Institute of Technology, Institut Pprime
09:30-10:30 (1h)
› Experimental analysis of transient thermal effects in a flexible rotor supported by a tilting pad bearing -
09:30-10:30 (1h)
› Features of the choice of bearings for the rotor low power mobile wind generator - Roman Polyakov, Orel State University named after I.S. Turgenev
09:30-10:30 (1h)
› Fluid film bearing control systems based on machine learning - A.V. Kornaev, Orel State University named after I.S. Turgenev
09:30-10:30 (1h)
› Influence of pad housing design on the performance of parallel thrust bearings - Anastassios Charitopoulos, National Technical University of Athens, Institut P' CNRS - Université de Poitiers - ENSMA UPR 3346 SP2MI
09:30-10:30 (1h)
› Prototype of Wireless Monitoring for Hydrodynamic Titling Pad Bearing - Wen Wang, Shanghai University
09:30-10:30 (1h)
› Speed-dependent lubrication conditions of a tilting-pad journal bearing - Thomas Hagemann, Institute of Tribology and Energy Conversion Machinery, Clausthal University of Technology
09:30-10:30 (1h)
› Stable Turbocharger Bearings - ALY ELSHAFEI, ALY ELSHAFEI
09:30-10:30 (1h)
› Study of Load Carrying Mechanism of a Novel Three-pad Gas Foil Bearing with Multiple Sliding Beams - Changlin Li, Harbin Institute of Technology，Shenzhen
09:30-10:30 (1h)
› Thermohydrodynamic study of tilting pad thrust bearing with oil film cooling - Andriy Zahorulko, Sumy State University
09:30-10:30 (1h)
› Water lubricated bearings with lignum vitae: an environmentally sound choice - Lyle Branagan, Pioneer Motor Bearing Company
10:30-11:00 (30min)
› Water-lubricated slide bearings – tribological evaluation of novel ceramic materials for bearings and face seals - Andreas Kailer, Fraunhofer Institute for Mechanics of Materials
11:00-11:30 (30min)
› Failure of tilting pad thrust bearings in subsea machinery, analysis and solution. - Chris Radcliffe, Sulzer Pumps UK Ltd
11:30-12:00 (30min)
› Investigation of the thermal effects in water-lubricated journal bearings with axial grooves - Michał Wodtke, Faculty o Mechanical Engineering, Gdansk University of Technology
12:00-12:30 (30min)
› Wear prediction in sliding bearings subjected to start-stop-operation - Florian Koenig, Institute for Machine Elements and Systems Engineering, RWTH Aachen University
14:15-14:45 (30min)
› Numerical Analysis of Long, Cylindrical Bore Bearing Including Shaft Bending - Michael Branagan, Pioneer Motor Bearing Company - Lyle Branagan, Pioneer Motor Bearing Company
14:45-15:15 (30min)
› Stability and dynamic characteristics of a gas foil journal bearing with multiple sliding beams - Changlin Li, Harbin Institute of Technology，Shenzhen
16:15-16:45 (30min)
› Approximation of the non-linear rotor dynamic resonance behaviour of vertically aligned hydro-units considering different design parameters - Daniel Vetter, Institute of Tribology and Energy Conversion Machinery, Clausthal University of Technology
16:45-17:15 (30min)
› Computational evaluation of dynamic coefficients of thrust bearings; effect of artificial surface texturing on dynamic bearing performance - Georgios Koutsoumpas, National Technical University of Athens
17:15-17:45 (30min)
› Like for like performance comparison of PEEK and PTFE thrust bearings for use in vertical pump and motor applications - Paul Bruce, Michell Bearings Ltd - John Butler, Michell Bearings Ltd
08:00-08:30 (30min)
› Toxic elements in plain bearing alloys and possibilities of their substitution - Edgar Gust, ZOLLERN BHW Gleitlager GmbH & Co. KG
08:30-09:00 (30min)
› Mechanical properties of polymeric self-lubricated bearings: Creeping contribution to “apparent” wear measurements - Marie-Lise Tremblay, Institut de Recherche d'Hydro-Québec [Varennes]
09:00-09:30 (30min)
› Interlocking metal-polymer bond by 3D-printed grid structure for hydrodynamic thrust bearings with PEEK-lined pads - Christoph Hentschke, RENK AG, Werk Hannover
09:30-10:00 (30min)
› Load capacity in mixed and boundary lubrication regimes of bismuth bronze bimetal bearing - Alain Leger, Kugler Bimetal SA - Natanael Dewobroto, Kugler Bimetal SA
10:00-10:30 (30min)
› Dynamic Characteristics of Journal Bearings Considering Mass-Conservation - Hiroo Taura, Nagaoka University of Technology
11:00-11:30 (30min)
› On the static and dynamic performance of compliant, water-lubricated sliding bearings; perturbed Reynolds equation vs. CFD-FSI based analysis methods - Troy Snyder, The University of Akron
11:30-12:00 (30min)
› Influence of Thermal Wedge Effect on Friction and Vibration in Fluid-film Bearings - A.V. Kornaev, Orel State University named after I.S. Turgenev
12:00-12:30 (30min)
› Unbalance Control of a Smart Electro-Magnetic Actuator Journal Integrated Bearing (SEMAJIB) - ALY ELSHAFEI, ALY ELSHAFEI
14:15-14:45 (30min)
› Rheological textures in bearing systems with parallel surfaces - Stefan Lampaert, Delft University of Technology, Faculty 3mE, Department PME
14:45-15:15 (30min)
› Static & Dynamic Properties of Controllable TPJB Considering Thermal Effects – Application to High Speed Compressors - Gani Michael, Technical University of Denmark
15:15-15:45 (30min)
Amphitéâtre
